SONY Vaio VPCEA33FD/W Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea33fd/w motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea33fd/w system board.
Related Laptop Model:
Vaio VPCEB24FD/B
Vaio VPCEB2JFX/L
Vaio VPCEB26FX/BI
Vaio VPCEB2KGX/B
Vaio VPCEB15FM/T
Vaio VPCEA4CGX
Vaio VPCEB24FX
Vaio VPCEB21FD
Vaio VPCEB16FD/W
Vaio VPCEB27FX/B
Vaio VPCEB4CGX
Vaio VPCEA36FX
Vaio VPCEB2M0E/PI
Vaio VPCEB15FM
Vaio VPCEA3S1E/W
Vaio VPCEB15FX/BI
Vaio VPCEB37FD
Vaio VPCEA24FM/B
Vaio VPCEA47FX/P
Vaio VPCEB15FB/BI
Vaio VPCEB1SFX
Vaio VPCEB1QGX/BI
Vaio VPCEA23EL
Vaio VPCEA15FGP
Vaio VPCEA3C4E
Vaio VPCEA2KGX/B
Vaio VPCEB26FX
Vaio VPCEA3BFX/BJ
Vaio VPCEA37FL/B
Vaio VPCEB16FD/L
Vaio VPCEA27FX/L
Vaio VPCEB33FD/WI
SONY Vaio VPCEA33FD/W laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA33FD/W motherboard and SONY Vaio VPCEA33FD/W fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
