SONY Vaio VPCEA2S1R/G Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea2s1r/g motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea2s1r/g system board.
Related Laptop Model:
Vaio VPCEA43FB/P
Vaio VPCEB27FD/B
Vaio VPCEB27FD/P
Vaio VPCEB26FX/T
Vaio VPCEB1E9R/BJ
Vaio VPCEA47FX/W
Vaio VPCEA3D4E
Vaio VPCEB3G4E
Vaio VPCEB4A4E
Vaio VPCEA43FX/WI
Vaio VPCEB46FD/WI
Vaio VPCEB31FX/T
Vaio VPCEA21FX/BI
Vaio VPCEA3SFX/BQ
Vaio VPCEB47GM/T
Vaio VPCEB3E9E/BQ
Vaio VPCEA47FX/P
Vaio VPCEB3S1R/BQ
Vaio VPCEB2KGX
Vaio VPCEB1Z1R/B
Vaio VPCEA37FL/L
Vaio VPCEA3M1R/WI
Vaio VPCEB4AFD/W
Vaio VPCEB3AFD/T
Vaio VPCEB1E8E/WI
Vaio VPCEA24FM/G
Vaio VPCEB1Z1E/B
Vaio VPCEA290S
Vaio VPCEB13EB
Vaio VPCEA3UFX/BJ
Vaio VPCEA31FX/T
Vaio VPCEB3A4E
SONY Vaio VPCEA2S1R/G laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA2S1R/G motherboard and SONY Vaio VPCEA2S1R/G fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
