SONY Vaio VPCEA2PGX/BI Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea2pgx/bi motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea2pgx/bi system board.
Related Laptop Model:
Vaio VPCEA37FX/L
Vaio VPCEB3E9E/BQ
Vaio VPCEB31FX/T
Vaio VPCEB4S1R/BQ
Vaio VPCEB36FGL
Vaio VPCEB3GGX
Vaio VPCEA27FX
Vaio VPCEB1TFX/B
Vaio VPCEA2FFX/B
Vaio VPCEB24FX
Vaio VPCEB37FD/W
Vaio VPCEB1MFX/BI
Vaio VPCEA4DGX
Vaio VPCEB4M1E/WI
Vaio VPCEA3EGX/BJ
Vaio VPCEB46FD/BJ
Vaio VPCEB33FD/G
Vaio VPCEB46FD
Vaio VPCEA23EL
Vaio VPCEB4M1R/BQ
Vaio VPCEA3UFX
Vaio VPCEB22FX/BI
Vaio VPCEB3KFX
Vaio VPCEA3S1R/L
Vaio VPCEA25FX
Vaio VPCEB1M1R/BJ
Vaio VPCEA4S1E/B
Vaio VPCEB1E9R/BJ
Vaio VPCEB28FX
Vaio VPCEA45FX/WI
Vaio VPCEB3J1E/T
Vaio VPCEB3RFX/V
SONY Vaio VPCEA2PGX/BI laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA2PGX/BI motherboard and SONY Vaio VPCEA2PGX/BI fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
