SONY Vaio VPCEA27FX/L Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea27fx/l motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea27fx/l system board.
Related Laptop Model:
Vaio VPCEA45FL/P
Vaio VPCEA45FL/W
Vaio VPCEB1A4E
Vaio VPCEA40EL/L
Vaio VPCEA36FM/G
Vaio VPCEA3S1R/B
Vaio VPCEA46FM/L
Vaio VPCEB2AFD/BQ
Vaio VPCEB37FD/W
Vaio VPCEA2UFX/B
Vaio VPCEA2S1R/G
Vaio VPCEB23FX/PI
Vaio VPCEA33FX/W
Vaio VPCEB3FGX
Vaio VPCEA2WGX/BI
Vaio VPCEA35FL/P
Vaio VPCEA3L1E/W
Vaio VPCEB18FD/BI
Vaio VPCEA3MGX
Vaio VPCEB4S1E/BQ
Vaio VPCEB2NGX
Vaio VPCEB16FX/W
Vaio VPCEA20EL/WI
Vaio VPCEB1E9J/BJ
Vaio VPCEB26FX/T
Vaio VPCEB2RFX/P
Vaio VPCEA3L1E/L
Vaio VPCEB29FX
Vaio VPCEA3C5E
Vaio VPCEB23FM/BI
Vaio VPCEB42FM/BJ
Vaio VPCEB4C4E
SONY Vaio VPCEA27FX/L laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA27FX/L motherboard and SONY Vaio VPCEA27FX/L fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
