SONY Vaio VPCEA23FB/L Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpcea23fb/l motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpcea23fb/l system board.
Related Laptop Model:
Vaio VPCEA33FB/P
Vaio VPCEA47FX/P
Vaio VPCEA4S1E/B
Vaio VPCEB19FS
Vaio VPCEB1E9R/BJ
Vaio VPCEB43FX/BJ
Vaio VPCEA2HFX
Vaio VPCEB27FX/P
Vaio VPCEB16FX/W
Vaio VPCEA37FX/P
Vaio VPCEA45FL/B
Vaio VPCEB25FX/PI
Vaio VPCEB3BFX/W
Vaio VPCEB26GM/WI
Vaio VPCEB2H4E
Vaio VPCEB290X
Vaio VPCEB2MGX
Vaio VPCEB25FX/T
Vaio VPCEA3BFX/WI
Vaio VPCEB4AFD
Vaio VPCEA24FM
Vaio VPCEB2PGX
Vaio VPCEA3FFX
Vaio VPCEB14FX/WI
Vaio VPCEB32FX/WI
Vaio VPCEB3L1E/WI
Vaio VPCEB3NFX/BJ
Vaio VPCEA3S1E/B
Vaio VPCEA2VGX/BI
Vaio VPCEB4E1R/WI
Vaio VPCEB4J0E/WI
Vaio VPCEA36FM/BJ
SONY Vaio VPCEA23FB/L laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPCEA23FB/L motherboard and SONY Vaio VPCEA23FB/L fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
