SONY Vaio VPC-EH2DFX Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony vaio vpc-eh2dfx motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony vaio vpc-eh2dfx system board.
Related Laptop Model:
Vaio VPC-EH290S
Vaio VPC-EH2AFX/L
Vaio VPC-EH1M1E/L
Vaio VPC-EH23FX/B
Vaio VPC-EH2L9E/B
Vaio VPC-EH2HFXL
Vaio VPC-EH2H1E/W
Vaio VPC-EH12FX
Vaio VPC-EH2M0E/W
Vaio VPC-EH1DFX
Vaio VPC-EH2HFXW
Vaio VPC-EH2JFX/W
Vaio VPC-EH1J8E/W
Vaio VPC-EH25FM/P
Vaio VPC-EH2CFX/W
Vaio VPC-EH2BFX/P
Vaio VPC-EH17FX/B
Vaio VPC-EH18GM/B
Vaio VPC-EH1M1R/W
Vaio VPC-EH1Z8E/B
Vaio VPC-EH1E1E/W
Vaio VPC-EH190X
Vaio VPC-EH2Q1E/L
Vaio VPC-EH22FX/L
Vaio VPC-EH1M1E/B
Vaio VPC-EH1CFX/B
Vaio VPC-EH22FX
Vaio VPC-EH16FX
Vaio VPC-EH2D1E/W
Vaio VPC-EH2S1E/B
Vaio VPC-EH15FX
Vaio VPC-EH2FGX/B
SONY Vaio VPC-EH2DFX laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY Vaio VPC-EH2DFX motherboard and SONY Vaio VPC-EH2DFX fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
