SONY MBX-225 Laptop Motherboard is Refurbished. the motherboard as a replacement for your sony laptop, this sony mbx-225 motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original sony mbx-225 system board.
Related Laptop Model:
VAIO VPCEC2NGX/BI
VAIO VPCEC2SFX
VAIO VPCEC3E9E/BJ
VAIO VPCEC4S0E/WI
VAIO VPCEC1Z1E/BJ
VAIO VPCEC4CFX/BJ
VAIO VPCEC2FFX
VAIO VPCEC2A4E
VAIO VPCEC490X
VAIO VPCEC2RFX
VAIO VPCEC2KGX/BI
VAIO VPCEC3BFX/BJ
VAIO VPCEC2S1E/BJ
VAIO VPCEC390X
VAIO VPCEC3M1E/BJ
VAIO VPCEC4BFX
VAIO VPCEC2FFX/BI
VAIO VPCEC290X
VAIO VPCEC3S1E/BJ
VAIO VPCEC3A4E
VAIO VPCEC3Z1E/BJ
VAIO VPCEC3DFX
VAIO VPCEC3DFX/BJ
VAIO VPCEC2LGX/BI
VAIO VPCEC4S1E/BJ
VAIO VPCEC1A5E
VAIO VPCEC3CFX
VAIO VPCEC2GGX/BI
VAIO VPCEC4A4E
VAIO VPCEC3S1R/BJ
VAIO VPCEC3C5E
VAIO VPCEC2E9E/BJ
SONY MBX-225 laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the SONY MBX-225 motherboard and SONY MBX-225 fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
