HP X18T-1000 CTO Laptop Motherboard is Refurbished. the motherboard as a replacement for your hp laptop, this hp x18t-1000 cto motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original hp x18t-1000 cto system board.
Related Laptop Model:
HDX X18-1110TX
X18-1280ES
HDX X18-1180CA
X18-1275EE
X18-1050ER
X18T-1100 CTO
HDX X18-1004XX
HDX X18-1180EW
HDX X18-1380EP
HDX18-1018TX
HDX X18-1201TX
HDX18-1008TX
HDX X18-1112TX
HDX X18-1290EW
HDX X18-1110EG
X18-1100 CTO
HDX X18-1001TX
X18-1023CA
X18-1004XX
HDX X18-1208TX
HDX X18-1009TX
X18-1173CA
X18-1009TX
X18-1018TX
X18-1374CA
X18-1004TX
X18-1101TX
HDX18-1005EA
HDX X18-1320EA
HDX X18-1104TX
X18-1180EP
HDX18-1020US
HP X18T-1000 CTO laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the HP X18T-1000 CTO motherboard and HP X18T-1000 CTO fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
