HP pavilion g7-2003ev Laptop Motherboard is Refurbished. the motherboard as a replacement for your hp laptop, this hp pavilion g7-2003ev motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original hp pavilion g7-2003ev system board.
Related Laptop Model:
pavilion g7-2202so
pavilion g7-2160sf
pavilion g7-2113er
pavilion g7-2221sb
pavilion g7-2040sy
pavilion g7-2363er
pavilion g7-2346sf
pavilion g7-2030ca
pavilion g7-2248sg
pavilion g7-2314er
pavilion g7-2360er
pavilion g7-2251sr
pavilion g7-2087eg
pavilion g7-2210sw
pavilion g7-2113so
pavilion g7-2147sf
pavilion g7-2345sg
pavilion g7-2110st
pavilion g7-2381eg
pavilion g7-2020eb
pavilion g7-2257sg
pavilion g7-2206eo
pavilion g7-2255sb
pavilion g7-2111eg
pavilion g7-2335sb
pavilion g7-2010ec
pavilion g7-2158er
pavilion g7-2225eb
pavilion g7-2150sg
pavilion g7-2372sd
pavilion g7-2159er
pavilion g7-2278sa
HP pavilion g7-2003ev laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the HP pavilion g7-2003ev motherboard and HP pavilion g7-2003ev fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
Remark: Compatible CPU Brand:
INTEL
Product Description
HP pavilion g7-2003ev Laptop Motherboard is Refurbished. the motherboard as a replacement for your hp laptop, this hp pavilion g7-2003ev motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original hp pavilion g7-2003ev system board.
Related Laptop Model:
pavilion g7-2207sg
pavilion g7-2235sw
pavilion g7-2361eb
pavilion g7-2220ew
pavilion g7-2304sf
pavilion g7-2191eg
pavilion g7-2350so
pavilion g7-2114er
pavilion g7-2111eo
pavilion g7-2301sa
pavilion g7-2253sr
pavilion g7-2205sb
pavilion g7-2130ez
pavilion g7-2348ef
pavilion g7-2160er
pavilion g7-2363er
pavilion g7-2204ez
pavilion g7-2313sr
pavilion g7-2111so
pavilion g7-2030sb
pavilion g7-2203sd
pavilion g7-2002sl
pavilion g7-2365er
pavilion g7-2140eo
pavilion g7-2322sz
pavilion g7-2311ss
pavilion g7-2350sc
pavilion g7-2325ez
pavilion g7-2250so
pavilion g7-2349sf
pavilion g7-2052er
pavilion g7-2340sf
HP pavilion g7-2003ev laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the HP pavilion g7-2003ev motherboard and HP pavilion g7-2003ev fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
