HP pavilion g7-1311sr Laptop Motherboard is Refurbished. the motherboard as a replacement for your hp laptop, this hp pavilion g7-1311sr motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original hp pavilion g7-1311sr system board.
Related Laptop Model:
pavilion g7-1250sg
pavilion g7-1102sg
pavilion g7-1255sa
pavilion g7-1245sd
pavilion g7-1220sm
pavilion g7-1282eg
pavilion g7-1340sf
pavilion g7-1101so
pavilion g7-1050ek
pavilion g7-1110sw
pavilion g7-1057sf
pavilion g7-1330sd
pavilion g7-1304sm
pavilion g7-1357sa
pavilion g7-1005sd
pavilion g7-1310sr
pavilion g7-1045sf
pavilion g7-1244eg
pavilion g7-1000so
pavilion g7-1110sg
pavilion g7-1004sa
pavilion g7-1106ss
pavilion g7-1007em
pavilion g7-1150sb
pavilion g7-1260sz
pavilion g7-1150sa
pavilion g7-1152sf
pavilion g7-1300eb
pavilion g7-1300em
pavilion g7-1337so
pavilion g7-1120sd
pavilion g7-1040sf
HP pavilion g7-1311sr laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the HP pavilion g7-1311sr motherboard and HP pavilion g7-1311sr fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
Remark: Compatible CPU Brand:
AMD
Product Description
HP pavilion g7-1311sr Laptop Motherboard is Refurbished. the motherboard as a replacement for your hp laptop, this hp pavilion g7-1311sr motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original hp pavilion g7-1311sr system board.
Related Laptop Model:
pavilion g7-1032eo
pavilion g7-1201sb
pavilion g7-1024eg
pavilion g7-1050sf
pavilion g7-1370sd
pavilion g7-1303eo
pavilion g7-1135sf
pavilion g7-1033sg
pavilion g7-1305so
pavilion g7-1131sf
pavilion g7-1118so
pavilion g7-1202em
pavilion g7-1002sa
pavilion g7-1317so
pavilion g7-1335ef
pavilion g7-1231eg
pavilion g7-1312sr
pavilion g7-1216eo
pavilion g7-1328sb
pavilion g7-1047sf
pavilion g7-1220so
pavilion g7-1174ca
pavilion g7-1160sd
pavilion g7-1008eg
pavilion g7-1304em
pavilion g7-1005sw
pavilion g7-1290sb
pavilion g7-1110sm
pavilion g7-1351si
pavilion g7-1220eb
pavilion g7-1179er
pavilion g7-1340sv
HP pavilion g7-1311sr laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the HP pavilion g7-1311sr motherboard and HP pavilion g7-1311sr fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
