HP Pavilion dv6-1300 CTO Laptop Motherboard is Refurbished. the motherboard as a replacement for your hp laptop, this hp pavilion dv6-1300 cto motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original hp pavilion dv6-1300 cto system board.
Related Laptop Model:
Pavilion dv6-1066el
Pavilion dv6-1306tx
Pavilion dv6-1232et
Pavilion dv6-1341el
Pavilion dv6-1224eo
Pavilion dv6-1352dx
Pavilion dv6-1270st
Pavilion dv6-1040ek
Pavilion dv6-1140el
Pavilion dv6-1240us
Pavilion dv6-1114tx
Pavilion dv6-1290ev
Pavilion dv6-1354us
Pavilion dv6-1120ef
Pavilion dv6-1320et
Pavilion dv6-1309tx
Pavilion dv6-1385et
Pavilion dv6-1138tx
Pavilion dv6-1370ev
Pavilion dv6-1203ee
Pavilion dv6-1009tx
Pavilion dv6-1115es
Pavilion dv6-1316el
Pavilion dv6-1207ax
Pavilion dv6-1305sl
Pavilion dv6-1016el
Pavilion dv6-1014el
Pavilion dv6-1200eh
Pavilion dv6-1240tx
Pavilion dv6-1099ef
Pavilion dv6-1322ez
Pavilion dv6-1260ev
HP Pavilion dv6-1300 CTO laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the HP Pavilion dv6-1300 CTO motherboard and HP Pavilion dv6-1300 CTO fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
