HP HDX X18T-1200 CTO Laptop Motherboard is Refurbished. the motherboard as a replacement for your hp laptop, this hp hdx x18t-1200 cto motherboard replacement is individually tested, it was designed to meet or exceed OEM specifications and is 100-percent compatible to the original hp hdx x18t-1200 cto system board.
Related Laptop Model:
HDX X18-1024CA
X18-1004TX
HDX X18-1013TX
X18-1080ED
HDX X18-1390EZ
X18-1017TX
X18-1180EW
HDX X18-1222EG
X18-1004XX
X18-1173CA
HDX X18-1374CA
HDX X18-1115TX
HDX18-1014TX
X18-1101EA
HDX X18-1350EO
X18-1014TX
HDX18-1011TX
X18-1180EP
X18-1109TX
HDX X18-1100 Series
HDX18-1007TX
HDX18-1018TX
X18-1080ET
HDX X18t-1000
X18-1190EZ
X18-1150EF
HDX X18-1099UX
HDX X18-1110TX
HDX X18-1025NR
HDX X18-1105TX
HDX X18-1088EZ
HDX X18-1201TX
HP HDX X18T-1200 CTO laptop disassemble tips
1. Remove the power supply and battery
Before the disassemble of the machine, remove the power supply and battery, and then press the power button, release the motherboard chip in the residual power.
2. Prepare a clean bowl or a small box
Clean small bowl or small box is used to store the screws, because the laptop has a lot of small screws, after the removal into a small bowl or small box to prevent the loss, in this process, but also remember, Remove the screws in that place and prevent missing when installed. It is best to take a few small bowl or a small box, the unloaded screws to sort, so when installed in the easier to know which screw in which position.
3. Remove the accessible components
Now a lot of notebooks are not completely fixed with screws, and some places are directly stuck together, for this situation, you'll need a prying tool.
4. Small brush and blower
Be sure to prepare a small brush and blower, because these two are indispensable in the process of cleaning up, and can not be replaced by a small brush on the HP HDX X18T-1200 CTO motherboard and HP HDX X18T-1200 CTO fan to clean, be sure to gently brush, be careful some small chips The air cleaner clears the dust in the gap.
